{{detailCtrl.mainImageIndex + 1}}/2

BlueBoat 4S バッテリー スプリッター ケーブル − BlueBoat 4S Battery Splitter Cable



This cables allows up to four 4S batteries to be connected for discharge, charge, and balancing. Internal fuses prevent overcurrent, but this product must be used with extreme caution and a knowledge of lithium ion batteries. Only connect identical batteries at the same charge and balance state! Please note! Please use this product with caution and read the instructions to avoid risk of fire and injury! SKU: BR-101746 HS Code: 8544.42.9090 <Product Description> This is a component of the BlueBoat. We recommend choosing components from the BlueBoat Components page to make sure you get everything you need. This cable connects up to four 4S batteries together for discharge, charge, and balancing. There are 50A fuses hardwired into each battery connection in the cable to protect against overcurrent situations. The batteries are connected via XT90 connectors and JST XH balance connectors. An additional XT90 and XH connector allows you to plug the group of batteries in as if it were one battery. Please note! Important: This product must be used with extreme caution! Batteries connected in parallel should always be of a similar type, similar age and condition, and identical charge and balance state. Always connect the balance connectors to the battery. Anything other than this can cause damage or destruction of a battery resulting injury and/or property damage. <Contents> ・1 x 4S Battery Splitter Cable - Revision History 6 February 2024 ・BR-101746 - Initial Release <Guides> BlueBoat Assembly Guide → https://bluerobotics.com/learn/blueboat-assembly/ BlueBoat Software Setup → https://bluerobotics.com/learn/blueboat-software-setup/ BlueBoat Operator’s Guide → https://bluerobotics.com/learn/blueboat-operators-guide/