Model/Part Number: DWE-FTEUWR1 10/100/1000M Copper to 1000Base-X Fiber This bare PCB converts CAT 5 Ethernet signals from the RJ-45 port to signals compatible with single mode SFP transceivers and vice versa. By using this media converter, copper Ethernet signals can be extended up to 20km depending on the SFP transceiver used (a much larger distance than the 100 meters limit for copper Ethernet signals). Unlike many other fiber converters, this is designed to be as space efficient as possible specifically for ROV use cases. It can be easily paired with almost all single-board computers (Raspberry Pi, Nvidia Jetson). Additionally, many considerations were in place to design this board as power efficient as possible, reducing generated heat and maximizing the flight time on your ROV! Technical Data Model/Part Number: DWE-FTEUWR1 https://docs.dwe.ai/hardware/interface-modules/gigabit-fiber-board Drawings https://docs.dwe.ai/hardware/interface-modules/gigabit-fiber-board#cad-file Content - 1x Fiber to Ethernet Converter Board - 1x JST-PH 2.0 Power Connector